FOIL DRIVE Propeller Guard

Description The Foil Drive Propeller Guard has been tried and tested and is designed for riders who want to add some extra bump protection around their propeller. ⚠️ Important: This accessory is not for everyone. Before purchasing, we recommend watching our full YouTube video where Ben explains the pros and cons to help you decide whether a Prop Guard is the right choice for your setup. Note: Existing Integrated Masts cannot utilise a Propeller Guard. Please contact us if you’d like to order a Propeller Guard as part of a new Integrated Mast. What’s Included 1x Propeller Guard Compatible With All Foil Drives using a Universal Motor Pod

Description The Foil Drive Assist MAX Base Kit is the flagship platform of the Foil Drive range, offering maximum thrust, runtime, and versatility – but without a motor or battery included. This kit is designed for riders who already have a compatible Gen2 Motor and MAX Battery (or plan to purchase them separately) and want the full Assist MAX electronics system with accessories. Key features: Universal Mast Adaptor – suits 99% of foil masts Bluetooth connectivity with the Foil Drive Mobile App Perfect for heavier riders, smaller boards/foils, or those wanting longer ride times Suited for all disciplines: Surf, Wing, Downwind, Wake, and Flatwater ⚠️ Important: This is a Base Kit only No motor included No battery included Note: Boards with carbon tracks may experience connectivity issues – see our External Antenna option. What’s Included (Base Kit) Foil Drive Assist MAX Electronics Box Motor Plug Protector with Keychain Foil Drive Nose Cone A Foil Drive Nose Cone B Foil Drive Universal Motor Pod (Rear, Short Nose, Long Nose) Foil Drive v2 Wireless Throttle Controller Foil Drive Controller Wrist Strap Foil Drive Mast Cable Guide (23 cm) Foil Drive Controller Wireless Charge Pad Micro USB Cable 40v Standard Foil Drive Charger (4 amp) 4x Mast Track Foam Inserts 2x Nose Cone Rocker Pads 2x Battery Grease 4x M8 Assist MAX Mast Plate Bolts (80 mm) 4x M6 Assist MAX Mast Plate Bolts (80 mm) Foil Drive 2.5 mm Driver Torx T40 Tee Handle Driver Torx T30 Tee Handle Driver Foil Drive Cleaning Cloth Foil Drive Gen2 Carry Case Foil Drive Mounting Bolt Bag 4x M8 Locking Tee Nuts 4x M6 Locking Tee Nuts 4x M3 x 20 mm Bolts for Locking Tee Nuts 2x M3 x 16 mm Latch Locking Bolts Foil Drive Motor and Pod Bolts Bag 4x Motor Pod Bolts (M3 x 12 mm) 3x Puck Bolts (M3 x 12 mm) 3x Motor Plug Bolts (M4 x 10 mm) Spare Parts Bag 2x O-Ring Seals – Foil Drive Assist MAX 2x Latch Assemblies – Foil Drive Assist MAX 3x Motor Plug Bolts (M3 x 12 mm) 4x Motor Pod Bolts/Puck Bolts (M3 x 12 mm) 2x Latch Locking Bolts (M3 x 16 mm) 2x Propeller Bolts (M3 x 30 mm) 2x Latch Pivot Bolts (M3 x 45 mm) Compatible With MAX Power Battery MAX Sport Battery Universal Motor Systems for Gen2 Project Cedrus Integrated Mast (Gen2) AXIS Integrated Mast (Gen2)

Description Increase your runtime and enjoy more low-end torque with the High Power Motor! Thanks to improved efficiency, the motor consumes less power, giving you more time on the water. Additionally, it provides increased low-end thrust, offering extra support when taking off. These benefits come with only minimal compromises: slightly less top-end speed and a small increase in weight (+130 g). A worthwhile trade-off for around 20% more runtime. V2 Motors The V2 Motor features a sleek, hydrodynamic design with a 10 mm extension, allowing for a motor plug and enhanced versatility via removable v2 motor cables to easily change cable length. When paired with Foil Drive Universal Motor Pods and Mast Adaptors, this motor is compatible with almost any foil mast on the market. The Cable This complete set includes a full v2 High Power Motor with a 20 cm / 8" removable cable. What’s Included 1x High Power v2 Motor with 20 cm / 8" Cable 1x Puck 4x Puck Screws 1x HP Stator 1x HP Rotor 1x 2 Blade Hub and Propeller Set 1x Stubby Cooler 1x 20 cm / 8" Removable v2 Cable Compatible With Assist MAX Assist Slim

Description The Foil Drive MAX Travel Battery allows you to take your gear to your favourite riding destinations and travel with an approved battery setup. The battery splits into three smaller modules for airline compliance: 2x modules at 129.6 Wh 1x module at 97.2 Wh These can be quickly reassembled with a few screws into a full battery rated at 9 Ah / 356 Wh, which provides slightly more runtime than the MAX Sport Battery. For storage, usage, and charging, the battery can remain fully assembled. Due to the extra connector length, the MAX Travel Battery requires the longer "A" Nose Cone on the Assist MAX. Airline Compliance Most airlines allow passengers to carry up to 2x 100–160 Wh batteries, though some may require pre-approval. Always check with your airline before travel. ⚠️ Restrictions: Travel batteries are designed for assist mode only and must not be used for e-foiling or continuous flat-water foiling. As with all Gen2 Foil Drive batteries, the MAX Travel Battery is IP68 certified, providing protection against water and dust. The main power plug includes larger connectors for the Foil Drive unit and smaller connectors for charging, with protective dust caps included. Maximum Boost: 20% Maximum Boost Time: 15 seconds Compatibility: Only with Foil Drive Assist MAX What’s Included 1x Foil Drive MAX Travel Battery Travel Bag Lipo Bag Power Plug Dust Caps Padded Foil Drive Travel Case (dedicated slots for each module) Information Slip with instructions, data sheet, and pre-travel steps for airport security Compatible With Foil Drive Assist MAX Standard 40V Charger 40V Fast Charger Tech Specs Nominal Voltage: 39.6 V Max Voltage: 46.2 V Rated Capacity: 9 Ah Rated Energy: 356.6 Wh Battery Weight: 2.65 kg (5.84 lbs) Certifications: UN, CE, IP68 Max Boost: 20% Max Boost Time: 15 seconds Dimensions (assembled, no case): 420 x 75 x 40 mm Dimensions (assembled in bag): 440 x 100 x 60 mm

Description The Foil Drive Removable v2 Motor Cable allows you to easily change the cable length and adjust the motor position on your mast. This enables full customization of your ride depending on foiling discipline, skill level, rider preference, and conditions. Compatible with the v2 Motor, the cable is available in multiple lengths to fine-tune motor placement on your mast. Each cable comes with a v2 Motor Cable O-Ring for secure installation. Optional Lengths: 12 cm / 4.7" 15 cm / 6" 20 cm / 8" 25 cm / 10" 60 cm / 23.5" 70 cm / 27.5" What’s Included 1x Foil Drive v2 Motor Cable 1x v2 Motor Cable O-Ring Compatible With Assist MAX Assist Slim