RRD Universal SWK ALU Foil Set Y27 2023
758,00 €*
FRONTWING:
2400
|
MAST:
85cm
1750
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible!
Recommended for novice riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil.
Recommended for novice heavy weight riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
Varianten ab 734,00 €*
2023 ION Safety Footstrap 1pcs
30,00 €*
The new ION safety footstrap offers a adjustable emergency opening during crashes.
NAISH Jet Foil Semi Complete 2022
Ab
628,00 €*
2022/23 Naish Jet Foil Series for maximum performance
There are three versions:
Jet Foil HA (High Aspect) Semi Complete (=no mast)
Jet Foil MA (Medium Aspect) Semi complete (=no mast)
Jet Foil Standard (Low Aspect) Semi Complete (=no mast)
Here are the main differences between these models.
High Aspect (HA) Foil:
High aspect foils typically have longer wings with a narrower chord (width) and a higher aspect ratio (length to width ratio).
These foils are known for providing greater efficiency and speed, making them suitable for advanced users and those looking for maximum performance.
High aspect foils are often preferred for racing and advanced foiling maneuvers due to their reduced drag and improved lift-to-drag ratio.
Medium Aspect (MA) Foil:
Medium aspect foils strike a balance between the characteristics of high and low aspect foils.
They are versatile and can cater to a wider range of riders, offering a good compromise between stability, speed, and maneuverability.
Medium aspect foils are suitable for intermediate foilers who want a balance of performance and control.
Low Aspect (LA) Foil:
Low aspect foils typically have shorter wings with a wider chord, resulting in a lower aspect ratio.
These foils are known for providing more stability and ease of use, making them suitable for beginners and those who prioritize comfort over maximum speed.
Low aspect foils are often chosen for learning to foil and for cruising at lower speeds.
When comparing the 2022 Naish Jet Foil HA, MA, and Standard models, you can expect the High Aspect to prioritize performance and speed, the Medium Aspect to offer a balance of features, and the Standard (Low Aspect) to focus on stability and ease of use.
The high number (for example 1600) gives you the surface of the front wing in cm2.
Scope of delivery: Jet front wing + EVA cover Stabilizer Jet HA + EVA cover Fuselage Carrying case Torx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)
2023 F-ONE Plane Gravity FCT 2200 + Mast Top Plate + Alu Mast 75cm
748,00 €*
GRAVITY FCT 2200
COMPLETE FOIL WITH MAST
The foils of the Gravity line are designed to provide a solid lift with a smooth take-off and great carving potential. Right in the line of its best-selling carbon sibling, this new Gravity is the ideal foil to get started and progress in wing-foiling and surf-foiling.
Smooth take-off
Stability and lift
Easy to turn
Area: 2195 cm²Span: 110 cmAspect Ratio: 5.5Weight: 2 kg (wing only)Alu Fuselage: 74 Surf
NORTH Sonar S178 Stabilizer Back Wing 2023
179,00 €*
Flat, loose and even faster, the new S178 Stabilizer is a high-speed upgrade to the Sonar Foil System for experienced riders. We recommend pairing the S178 with Front Wing size HA950, or smaller. The S178 has a higher aspect ratio than the S208.
Features
Top mounted for early breach recovery
Carbon pre-preg construction
Thin profile section for reduced drag
Materials
Pre-Preg Carbon
CABRINHA Fusion Alloy Top Plate MKII 2023
124,00 €*
FUSION ALLOY TOP PLATE MKII
HIGH PERFORMANCE - DURABILITY
SIZES: ONE SIZE
The Fusion Alloy Top Plate is constructed from extruded aircraft grade aluminium that result in an incredibly rigid mast to board socket connection. It can be used with any Cab Fusion alloy mast.
Features:
Precision CNC machined aircraft grade, anodized 6061-T6 aluminium
Incredible torsional stiffness
NORTH Sonar S208 Stabilizer 2022
189,00 €*
Flat, loose and fast, the new S208 Stabilizer is another high performance upgrade to the Sonar Foil System for experienced riders. The S208 has a higher aspect ratio than the S210, which means less drag, and the flatter rondure (front view) enables more manoeuvrability. As we’ve increased our front wing range, we’ve needed to match the lift force of the front wing with the stabilizer. While your front wing creates vertical lift, your stabilizer has a downward acting force, which prevents the front wing from nose-diving. A larger stabilizer translates into more front foot pressure, while a smaller stabilizer equals less front foot pressure. The North stabs are mounted on top of the fuselage, which helps them to avoid turbulence from the flow of the front wing, creating a smoother ride. This top mounting also gives the rider an early breach warning - the stab pierces the water surface first, giving you a better chance of recovery before your front wing gets too high. Like the Front Wings, all Sonar Stabilizers are pre-preg carbon construction, ensuring optimal stiffness and direct performance. The thin profile section reduces drag, while the material properties help maintain structural integrity and rigidity. Stabs have a huge influence on performance. As you progress to smaller wing sizes, we recommend changing to a smaller stabilizer to be more manoeuvrable. Experienced riders will really feel the difference. A new tail can have a big impact on your style.
Features
Clean undisturbed flow
Flat
loose and fast
Easy breach recovery
Thinner profile
Higher aspect ratio
Less surface friction for better glide
Materials
Carbon Pre-preg
NORTH Sonar SF930 Front Wing 2023
699,00 €*
We’ve engineered our Sonar Surf Series for super low stall speeds, effortless pumping and surf-style carving. Ideal for riders wanting more from surf and downwind swells (with or without a wing). The foils insensitivity to angle of attack change forgiveness means you don’t have to be an expert or have perfect pumping technique. A refined balance of roll stability and manoeuvrability gives you confidence during pumping and take-offs, and the ability to initiate powerful rail-to-rail carves. Push it harder, lip stall and lay down banking turns, knowing tip ventilation is a thing of the past. Reduced distance between the mast and front wing makes for faster, tighter pivoting turns. We’ve kept the span similar between the three sizes, providing the same ride feel across the entire size range. The SF promises that frictionless sensation of glide at slower speeds. Responsive and agile. With intuitive recovery. Wakesurfing ten waves back, prone-surfing, wing-surfing, pumping or mastering the downwind. The Sonar SF Series. At one, with it all.
Features
Recommended with S215 Stabilizer
Super low stall speed
Effortless pumping
Surf-style turning (smooth rail to rail and surf yaw snap)
Forgiving and accessible for faster progression
Materials
Pre-Preg Carbon
Titanium Screws
F-ONE V-Straps Foilboard
Ab
98,00 €*
Our new V-STRAPS have been specifically designed for foilboards. The shape and material have been selected to bring maximum comfort and support while riding. Both straps have a thin layer of neo-fleece material on the inside that will bring extra comfort and softness. The main V-shaped piece for your front foot is compatible with boards that have one or two rows of inserts.
Two options are available depending on the type of inserts (metal or plastic) on your board:
M6 Screw Set (Ref. 77228-8001)
1x Front V-Strap
1x Back strap
1x V-Block, to place at the center of the V-strap for the screws
4x Plastic shims
6x M6 22mm screws (SST 316)
6x Metal washers (SST 316), 12mm external diameter
Recommended for : POCKET, POCKET CARBON, ROCKET ASC
Self-tapping Screw Set (Ref. 77228-8002)
1x Front V-Strap
1x Back strap
1x V-Block, to place at the center of the V-strap for the screws
6x Self-tapping screws 5x25mm (SUS 316)
6x Metal washers (SST 316), 14mm external diameter
4x Plastic washers (thickness = 2mm), 17mm external diameter
Recommended for : ROCKET WING, ROCKET WING CARBON, ROCKET WING – S, ROCKET WING -S CARBON, POCKET CARBON CUSTOM
DUOTONE Foil Set Complete AL QM - Aero Free SLS 2024
1.608,00 €*
Wing / SUP / Prone // Beginner: 82/76-1750/250 /// Intermediate: 82/66-1500/250
Unser Favorit für alle Einsteiger der mittleren Gewichtsklassen zwischen 65 kg und 85 kg! Mit dem Quickmount Mast verbringst du weniger Zeit beim Schrauben und mehr Zeit auf dem Foil. Das gutmütige und gleichzeitig aufregend zu fahrende Aero Free 1750 wirst du von den ersten Versuchen bis zum gehobenen Fahrlevel lieben.
SABFOIL Kraken Mast Plate Kraken Modular System
188,00 €*
Q01K NOT INCLUDED (KRAKEN QUICK RELEASE)
Kraken Mast Plate
Kraken Modular System
ALL-ROUND
Connection SystemKraken Modular System
The Kraken Mast Plate is one of the modular connection systems for masts, together with its tuttle counterpart (T03K).
The strong point of this system is its modularity, as it is always possible to use your mast both with plate and with tuttle.
This Plate has been designed for maximum lightness and strength. It has been milled directly in our factory starting from premium aluminum ingots and then it has been deeply anodized by certified partners.
The Kraken Mast Plate also makes it possible to upgrade your set-up with the quick release system (Q01K), thanks to which you can assemble and disassemble your hydrofoil in a few seconds, without losing the configuration on the board.
NORTH Sonar S210 Stabilizer 2022
189,00 €*
Exceptional glide. Our new thinner profile and higher aspect ratio carbon stabilizers offer reduced resistance and a more efficient outline. The S270 is your go-to for all round kite, wing and surf performance, offering optimal balance, speed, efficiency and control. Pair the S210 with a smaller front wing for high-speed performance and a more agile feel. Pair the S320 with a larger front wing for early planing, greater balance and stability.
Features
Clean undisturbed flow
Easy breach recovery
Thinner profile
Higher aspect ratio
More efficient outline shape
Less surface friction for better glide
Materials
Carbon Pre-preg
CABRINHA Fusion Carbon Hollow Mast 2023
Ab
934,00 €*
FUSION CARBON HOLLOW MAST
HIGH PERFORMANCE - LIGHT WEIGHT
SIZES: 74 / 84 / 94 CM
The all-new Hollow Mast system is yet another example of the state of the art foil program from Cab Design Works. It nods to the critical & complete design approach of the team to view every foil component individually with a view to improve stiffness across the entire platform. It implements a bladder molded construction with strategic layering of carbon as far to the outside as possible. This culminates in our stiffest ever mast to front wing connection. This reduction in flex eliminates any lag in the turn and transfers energy while pumping seamlessly through to the front wing.
Features:
Optimized airfoil for low drag to stiffness ratio
TE scallop for improved turning and efficiency
Integrated high modulus mounting plate
Bladder molded, hollow mast construction for superior skin compression, providing ultimate rigidity
Premium high modulus prepreg carbon fiber construction
Barrel Nut compatible(x-series MkII and H-series MKII)
Tapered Fit
Mast Guide:
SABFOIL S380/PF - Gullwing 380 Pro Finish I Hydrofoil Stabilizer
220,00 €*
Sabfoil Gullwing 380 Pro Finish | Hydrofoil Stabilizer
MAIN SPECS
Surface: 180 cm2
AR: 8,10
Wingspan: 380 mm
Chord: 60 mm
Range
Gullwing
Stabilizer-Fuselage Connection
Standard
This fast and versatile stabilizer is ideal for all those who want to increase the control and stability of their hydrofoil. The gullwing shape guarantees good directionality while riding without sacrificing maneuverability when needed.
The S380/PF is delivered with SAB Pro Finish, and thus hand sanded to achieve a matte surface with 0-thickness graphics, for an elegant Made in Italy product with maximum performance.
NORTH Sonar SF1230 Front Wing 2023
749,00 €*
We’ve engineered our Sonar Surf Series for super low stall speeds, effortless pumping and surf-style carving. Ideal for riders wanting more from surf and downwind swells (with or without a wing). The foils insensitivity to angle of attack change forgiveness means you don’t have to be an expert or have perfect pumping technique. A refined balance of roll stability and manoeuvrability gives you confidence during pumping and take-offs, and the ability to initiate powerful rail-to-rail carves. Push it harder, lip stall and lay down banking turns, knowing tip ventilation is a thing of the past. Reduced distance between the mast and front wing makes for faster, tighter pivoting turns. We’ve kept the span similar between the three sizes, providing the same ride feel across the entire size range. The SF promises that frictionless sensation of glide at slower speeds. Responsive and agile. With intuitive recovery. Wakesurfing ten waves back, prone-surfing, wing-surfing, pumping or mastering the downwind. The Sonar SF Series. At one, with it all.
Features
Recommended with S215 Stabilizer
Super low stall speed
Effortless pumping
Surf-style turning (smooth rail to rail and surf yaw snap
Forgiving and accessible for faster progression
Materials
Pre-Preg Carbon
Titanium Screws
Naish S25 Jet 2450 Complete
988,00 €*
Naish S25 Jet Foil Complete 2450
The Naish S25 Jet Foil Complete 2450 shares many similar features to its smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind and Wing-Surf foiling. These wings are paired with the Stabilizer 450 backwing, which gives the complete setup more lift at lower speeds and are optimized for improved turning and pumping performance
To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.
Jet 2450 is ideal for riders +250 lbs
Performance Features
Jet 2450 Front Wing = Optimized early lift at low speeds
Stabilizer 450 Back Wing = Early lift & intuitive turning
75 cm Mast = Improved turning & pumping performance
Lighter Design = Better control & response
Construction Features
Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years
Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast
Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts
Jet 2450 - 3 x 30mm & 2 x 20 mm Torx Head Stainless Steel Screws (connect wings to fuselage) = Superior torque + corrosion resistant
3 x 25 mm Torx Head Stainless Steel Screws (connect mast to fuselage) = Superior torque + corrosion resistant
4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (direct connect plate to board) = Superior torque + corrosion resistant
Tech Specs
SizeFront Wing DesignAspect RatioWingspanProjected Surface Area
75 cm
Jet 2450
4.1
39.4"/100 cm
380 in²/2450 cm²
Naish S25 Jet Foil Complete 2450
2021 F-ONE FW GRAVITY CARBON 2200 + FUSELAGE CARBON LONG + STAB C275 SURF + TOOL TORX T30
588,00 €*
GRAVITY CARBON 2200
FLY IN FULL CONTROL
The foils of the Gravity line are designed to provide a solid lift with a smooth take-off and great carving potential.
Smooth take-off
Stability and lift
Area: 1760 cm²Span: 90 cmAspect Ratio: 4.6Weight: 1.95 kg (wing only)
F-ONE Foil Top Parts 2023
Ab
169,00 €*
The F-ONE aluminum mast can be connected to the board with several options. Choose from a 4-bolt top plate, a standard Tuttle head, a KF or a DKF head.
All versions are fastened to the mast through a sleeve and a two-bolt system. The Mast Top parts are machined out of solid blocks of 6061 aluminum. The accuracy of the CNC makes sure the geometry of the connection is perfect. Stainless steel inserts are used systematically to preserve the durability of the fastening connections.
The Top Plate has become standard on the market and is compatible with any board featuring a Twin-Tracks system. The spacing we use for the four screws is 160×90 mm, but our latest version also features an option for 165×90 mm.
The Top Tuttle makes F-ONE foils compatible with all Tuttle boards. The Tuttle format is the original and standard one. A flange has been added around the base of the head to better spread the load through the structure of the board. The KF and DKF heads make current F-ONE foils compatible with kite or SUP foil boards produced previously with these boxes.
Refs: 77207-0401 (mast top plate) / 77207-0404 (mast top tuttle) / 77207-0403 (mast top deep kf) / 77207-0402 (mast top kf)
JP SUP WingAir SE Wing Foil Board 2023
Ab
558,00 €*
WingAir SE
PURE WING FOILING
Our pure wing foil inflatable. The compact hull and JP’s superior construction provide a stiff feel when flying on the foil. It is super user friendly because it provides all advantages of inflatables: comfortable and smooth on your skin and knees, light and small for easy transport and storage. More on inflatables? See below...There is no better JP board when it comes to pleasurable, enjoyable and hassle-free winging in light winds. Pure wing foiling fun!Top recommendation: The NeilPryde Glide foil fits perfectly and is our first choice – the Glide Wind for beginners and/or heavy weights (for its ease, control and steady lift), the Glide Surf for light and/or advanced riders (for its agility and life).The two sizes from last year (5’4”x27.5” and 6’0”x28.5”) are now partnered with a smaller 5’0”x27.5”. All boards feature footstrap positions for wing-foiling and foiling.
Inflatables have clear advantages over hardboards: They are super comfortable and user friendly as they are easy to transport and store. These JP inflatable wing foil boards are specially developed and equipped for early take-off, featuring hard rails, Triple Layer Composite Drop Stitch and more. Additionally, they come in JP’s superior welded technology.
Welded Technology: This heat-welded connection was introduced last year and proved to be successful. It creates a very strong mechanical joint that literally fuses two parts into one and thus is superior to the standard gluing. This welding process of amalgamating two different layers into one makes the board safer, lighter and stiffer.
Hard Rails: In the tail, the specially developed, super clean hard rails are covered by a fibre reinforced layer of PVC cloth and create a smooth and efficient water release. Thus, the board picks up speed to take-off easily. Touchdowns are smooth and comfortable.
Triple Layer: They come with Pre-Laminated Triple Layer Composite Drop Stitch, Fibre Reinforced Stringers in deck and bottom and Welded Rails and will surprise you with their stiffness.
Track Foil Plate: The board features a Track Foil Plate of the same size as on our hard boards providing a big range of foil placement. The G10 material adds additional longitudinal stiffness to the hull. On the other hand, this plate is not too long – thus you don’t need an oversized bag but it can still be folded easily into a normal size SUP backpack.
Footstraps: The boards come with three easy-to-mount footstraps for wing foiling.
Comfort: The hull’s soft skin is covered with a large, slip-proof EVA sheet for unmatched comfort and a safe stance. You also don’t have to worry about mistakes anymore because you won’t get hurt when falling on it.
Transport and Storage: Rolled up, the boards fit into a backpack – no more need for a car with roof rack for transport or a big garage for storage. In times when airlines are hesitant to accept windsurf equipment, the boards’ backpack dimensions are a major advantage!
ADDITIONALLY INCLUDED ACCESSORIES
* 3 straps* Pump* Repair set* User manual* Backpack
PLEASE NOTE:
Reduced foil track depth [13mm]. Make sure to use the right screw length for your plate mount system!MAX screw length = 13mm + Plate Thickness
All JP foil boards come without screws to attach the foil. Reason: The screw length has to match the plate thickness which varies from foil and brand, so, screws are provided by the foil brand.
Note: This inflatable JP board features a special G10-track-plate requiring shorter screws, than all our JP composite boards.For example:The screws supplied with NP foils fit all JP composite boards. But these screws are too long for this inflatable!Therefore, NeilPryde now also offers a set of four M8x20 screws (titan, torx key head) in their spare parts range.
2020 Manera Kite Foil Box
87,20 €*
Infos & Characteristics
Foil box features several compartments and protection flaps to protect a disassembled foil. Mast, front wing, stabilizer, screws & tools all have a specific room.
There’s even a compartment for a helmet.
SIZES
1100X310X200MM - 1.45KG
CABRINHA Fusion V-Series Tail Stabilizers 2023
Ab
202,00 €*
FUSION V-SERIES TAIL STABILIZERS
HIGH ASPECT
SIZES: 180 / 230 / 285
One of the biggest effects on hydrofoil performance comes from the stabilizers. In a sport that is so diverse in its attributes and styles of riding, you need to have the right product to help you get the maximum performance from your system. Introducing the new V-Series Stabilisers. V represents versatility, and through the modular Fusion system, you are able to custom tailor your ride. Add a V-Series Stabiliser to any of the Cabrinha Fusion foils and get ready for the next step in performance & usability.
Features:
Optimal efficiency and maneuverability
Flat center, to downward tips, for perfect balance between locked-in feel and agility
Single molded components for minimal drag
Full prepreg carbon construction
PMI core for superior strength to weight ratio
180 cm², WS-340, AR-6.42
230 cm², WS-400, AR-6.96
285 cm², WS-450, AR-7.11
Set Includes:
Stabilizer, wing covers, 2pcs m6 ss316 torx Ti coated screws, {(ear fuselage not included)
2021 Duotone Spirit Freeride 700/60 Foil
898,00 €*
SPIRIT FREERIDE 700 / 60
Das Spirit Freeride ist ein einfach zugängliches Allround Foil und das ideale Mittel, um deine Foiling-Skills rasch zu verbessern.
HAUPTMERKMALE
DUOTONE SPIRIT FREERIDE
EINFACH ZUGÄNGLICHES ALLROUND FOIL
DAS SPIRIT FREERIDE IST EIN EINFACH ZUGÄNGLICHES ALLROUND FOIL UND DAS IDEALE MITTEL, UM DEINE FOILING-SKILLS RASCH ZU VERBESSERN.
RICHTUNGSSTABILITÄT UND -STEUERUNG
GUT VORHERSEHBARE RICHTUNGSSTABILITÄT UND -STEUERUNG IN JEDER SITUATION.
NEUE ALUMINIUM-FUSELAGE MIT POCKET FÜR MASTVERBINDUNG
EINE EINZIGARTIGE NEUE ALUMINIUMFUSELAGE MIT POCKET FÜR DIE MASTVERBINDUNG GARANTIERT EINE MAXIMALE STEIFIGKEIT SOWIE DIE BESTE UND DIREKTESTE ÜBERTRAGUNG VON STEUER-IMPULSEN.
NEUES MASTPROFIL MIT LÄNGERER PROFILLÄNGE
DAS NEUE MASTPROFIL MIT LÄNGEREM PROFIL VERHINDERT EINE VENTILATION BEI HOHEM SPEED.
VORDERER UND HINTERER WING AUS CARBON COMPOUND
EINZIGARTIGE UND UNGLAUBLICH ROBUSTE WINGS VORNE UND HINTEN AUS CARBON COMPOUND.
FORMULA 1 FUSION TECHNOLOGIE
DIE FORMULA 1 FUSION TECHNOLOGIE WIRD FÜR DIE VERBINDUNG ZWISCHEN MAST UND BRETT EINGESETZT – MADE IN GERMANY!
DETAILS
DUOTONE SPIRIT FREERIDE
Das Ziel hinter dem Spirit Freeride Foil war, mit einem Mehrzweck-Hydrofoil-Setup den perfekten Allrounder zu schaffen. In den meisten Fällen wirst du nicht mehr als einen kleinen Power-Schub von deinem Kite brauchen, um bereits bei geringer Geschwindigkeit zu foilen. Die Größe des hinteren Wings des Spirit sorgt für eine gute Pitchregelung bei geringer Geschwindigkeit, ohne dir im Top-End im Weg zu stehen. Winglets bieten eine gute Richtungsstabilität und -steuerung. Für den Beginn deiner Foil-Freeride-Laufbahn gibt es keine bessere Wahl als das Spirit Freeride Setup zu einem unschlagbaren Preis.