1750
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible!
Recommended for novice riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil.
Recommended for novice heavy weight riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
All-around Freeride Kite Foil
Standard Mast Size: 90 cm | Aspect Ratio: 6.5 | Wingspan: 25.3"/64.2 cm | Projected Surface Area: 600 cm2
Forgiving and user-friendly, the Thrust Kite Foil Complete delivers a super smooth foiling experience for anyone from beginner to advanced to cruise on. Its segmented front wing combines the stability of a dihedral shape with the early take-off and low speed lift of an anhedral wing. Tuned for balance, this foil setup reduces pumping time by helping riders quickly find a stable plane and lock in, while the higher aspect ratio lengthens the glide. A large sweet spot delivers ample stability for a more natural feel that encourages riders to move more freely and gain the confidence to progress. Smooth gliding and incredibly intuitive, this effortless setup frees your attention to enjoy the experience and expand your abilities.
The Abracadabra Plate connection makes it quick and effortless to detach and store your separated board and foil. One screw is all it takes to quickly and easily disconnect the entire foil system from your board, while the bottom of the plate can remain in place. Just a few turns of a #3 Phillips head screwdriver yields a secure and tight connection between foil and board. The Abracadabra Plate is available in the complete set or as an aftermarket item for any current and previous Naish aluminum mast and is also offered as an accessory for the carbon mast.
View the Assembly Instructions HERE
The Hover Kite 130, 155, and 160 foilboards have a shallower track system and therefore require the shorter screws as supplied with the board. These boards CANNOT be used with the longer screws that come with the Naish Thrust foil.When pairing all other Naish Hover Foilboards with your Naish Foil, use the screws supplied with the foil. Reference which screws to use HERE
WHAT'S NEW
Front Wing–50% Lighter
Back Wing
Monocoque Ultra Robust Back Wing Construction
Heavy-duty Fuselage
Abracadabra Plate Connection
Stealth Stripes
CONSTRUCTION
Aircraft Grade High Precision CNC Cut Fuselage
Aircraft Grade Extruded Aluminum Mast
(All aluminum masts will receive a custom wet-sanded Speed Finish)
Carbon/Glass PrePreg & Hi Mod Foam Core Front Wing Construction
Carbon/Glass PrePreg & Hi Mod Foam Core Monocoque Back Wing Construction
316 Marine Grade Stainless Steel Hardware
COMPLETE KIT INCLUDES
Front Wing KS 2
Back Wing KS 2
Mast 90 cm/Aluminum
Fuselage KS/Surf
Foil Assembly Screw Set
Abracadabra Plate
Abracadabra Plate Screw Set
Foil Cover
2022/23 Naish Jet Foil Series for maximum performance
There are three versions:
Jet Foil HA (High Aspect) Semi Complete (=no mast)
Jet Foil MA (Medium Aspect) Semi complete (=no mast)
Jet Foil Standard (Low Aspect) Semi Complete (=no mast)
Here are the main differences between these models.
High Aspect (HA) Foil:
High aspect foils typically have longer wings with a narrower chord (width) and a higher aspect ratio (length to width ratio).
These foils are known for providing greater efficiency and speed, making them suitable for advanced users and those looking for maximum performance.
High aspect foils are often preferred for racing and advanced foiling maneuvers due to their reduced drag and improved lift-to-drag ratio.
Medium Aspect (MA) Foil:
Medium aspect foils strike a balance between the characteristics of high and low aspect foils.
They are versatile and can cater to a wider range of riders, offering a good compromise between stability, speed, and maneuverability.
Medium aspect foils are suitable for intermediate foilers who want a balance of performance and control.
Low Aspect (LA) Foil:
Low aspect foils typically have shorter wings with a wider chord, resulting in a lower aspect ratio.
These foils are known for providing more stability and ease of use, making them suitable for beginners and those who prioritize comfort over maximum speed.
Low aspect foils are often chosen for learning to foil and for cruising at lower speeds.
When comparing the 2022 Naish Jet Foil HA, MA, and Standard models, you can expect the High Aspect to prioritize performance and speed, the Medium Aspect to offer a balance of features, and the Standard (Low Aspect) to focus on stability and ease of use.
The high number (for example 1600) gives you the surface of the front wing in cm2.
Scope of delivery: Jet front wing + EVA cover Stabilizer Jet HA + EVA cover Fuselage Carrying case Torx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)
Our new high-strength pre-preg carbon fuselage is strong, durable and corrosion resistant, and weighs ~50% less than the alloy version, with equal strength and stiffness. The shorter length C600 Fuselage improves pumpability and has a sporty feel with earlier take-offs. The forgiving longer C700 fuselage is ideal for wing-foiling or learning to foil, offering greater stability and more control.
Features
High-performance carbon pre-preg construction
Weighs ~50% less than the alloy version with equal strength and stiffness
GeoLock tapered geometry locking system for optimised load bearing connection
Hydrodynamically-optimised shape for minimal resistance
Compatible with all Sonar Masts
Compatible with all Sonar Front Wings
Available in C600 or C700 sizes
WING / PRONE / KITE / PUMP / DOWNWIND / SUP / WIND
Aufbauend auf dem positiven Feedback, das wir für unsere 60cm Alu 3BS Fuselage erhalten haben, haben wir beschlossen, diese Verbesserungen auf unsere längeren Fuselages auszudehnen. Wir haben jetzt 66 cm und 74 cm AL 3BS Fuselages, die unsere früheren Carbon-Fuselages mit 68 und 78 cm ersetzen. Die Umstellung auf Aluminium ermöglicht es uns, den Querschnitt der Fuselage zu reduzieren und dadurch den durch die Fuselage erzeugten Widerstand zu verringern. Gleichzeitig erhöhen wir die Festigkeit und das Gewicht nur um 2,5%. Alle unsere AL 3BS-Fuselagens verfügen über eine kleine Vertiefung hinten, in die der Stabilisator eintaucht und die Hydrodynamik verbessert. Sie haben große Aussparungen, wo die Befestigung des Frontflügels ist, um das Gewicht auf ein Minimum zu reduzieren. Natürlich erfordern die neuen Aluminium-Fuselages etwas mehr Pflege und müssen nach jedem Gebrauch demontiert und mit Süßwasser gespült werden, aber wir glauben, dass der Gewinn an Leistung es wert ist!
FUSION ALLOY TOP PLATE MKII
HIGH PERFORMANCE - DURABILITY
SIZES: ONE SIZE
The Fusion Alloy Top Plate is constructed from extruded aircraft grade aluminium that result in an incredibly rigid mast to board socket connection. It can be used with any Cab Fusion alloy mast.
Features:
Precision CNC machined aircraft grade, anodized 6061-T6 aluminium
Incredible torsional stiffness
ALLROUND (FREERIDE / FREESTYLE / FREESURF / PRONE / WIND)
Der Aero Free ist unser Alleskönner.
Unsere drei neuen größeren Größen 1500, 1750 und 2000 sind die perfekten Wings für Einsteiger und Aufsteiger.
Ihre stabilen Flugeigenschaften, der frühe Lift und die enorme Endgeschwindigkeit machen sie zu den idealen Wings für schnellen Fortschritt.
Die drei kleineren Größen 800, 1000 und 1250 sind bereits seit einem Jahr auf dem Markt und haben sich als leistungsstarke Allrounder etabliert.
Der Aero Free liegt in Bezug auf Gleitleistung und Manöverfähigkeit genau in der Mitte unserer neuen Glide und Carve 2.0 Reihe. Er hat eine etwas höhere Aspect Ratio als der Carve 2.0, aber ein anderes Profil und eine andere Outline, die eher auf eine gute Mischung aus Manövrierbarkeit, Gleiten, Pumpen und allgemeiner Benutzerfreundlichkeit abzielt.
Der Aero Free deckt alle Disziplinen ab: Wing, Prone, SUP und Windsurf Foiling. Der Name verrät es bereits, dieser Wing ist nicht an eine bestimmte Disziplin gebunden, er fühlt sich bei sämtlichen Bedingungen und Könnensstufen wohl - egal ob Freeride, Freestyle, Freerace, Surf oder Downwind. Mit einem Aspektverhältnis zwischen 6.0 für das größere 2000er und 7.3 für das kleine 800cm2 sind diese Front Wings genau richtig, um die Grundlagen zu erlernen und dein Foil-Können in einer Vielzahl von Bedingungen zu beschleunigen - vom Flachwasser-Cruisen bis hin zu Sprüngen und Foilen in den Wellen. Mit seiner verspielten Outline und seinem widerstandsarmen Profil fühlt er sich aufregend und schnell an, bietet aber dennoch viel Leichtigkeit und Kontrolle. Es gibt eigentlich keine Bedingungen, in denen sich dieser Wing nicht zu Hause fühlt!
Stabilizer C
Unsere Stabilizer C haben sich in den letzten Jahren in Kombination mit sämtlichen Front Wings bestens bewährt. Sie sind das, was man als "traditionell" bezeichnen würde mit einer mittleren Aspect Ratio, flach in der Mitte und ein subtiles Winglet zu den Wing Tips hin.
Ein gut getestetes und bewährtes Design, das hervorragend mit unseren Aero Free SLS und Aero Lift SLS Front Wings zusammenpasst.
Die C-Serie steht für Kontrolle. Bei ihnen geht es darum, den Fahrer auf seiner Flugbahn zu unterstützen und dem Foil Kontrolleigenschaften zu verleihen, ohne den Spaßfaktor einzuschränken.
Obwohl sie einen stabilen Flug gewährleisten, sind sie perfekt für sanfte Turns auf der Welle.
Mit Hilfe der brandneuen dünnen Shims kannst du den Anstellwinkel deines Stabilizers in Schritten von +/- 0,3 Grad anpassen, passend zu deinem Fahrstil oder den aktuellen Bedingungen.
SURFACE (CM / IN²)
800 / 124.0
1000 / 155.0
1250 / 193.8
1500 / 232.5
1750 / 271.3
2000 / 310.0
SPAN (CM / IN)
78 / 30.8
84 / 33.2
90 / 35.6
95 / 37.5
102 / 40.3
110 / 43.5
ASPECT RATIO
7.2
6.8
6.4
6.0
6.0
6.0
REC. STABILIZER
C 216
C 216
C 250
C 250
C 250
C 300
SCREW HOLE 1 (CRBN FL / ALU FL)
M8X30 / M8X25
M8X30 / M8X25
M8X30 / M8X30
M8X35 / M8X30
M8X35 / M8X30
M8X35 / M8X30
SCREW HOLE 2
M8X25
M8X30
M8X30
M8X30
M8X30
M8X30
SCREW HOLE 3 (CLOSEST TO MAST)
M8X25
M8X30
M8X30
M8X30
M8X30
M8X30
REC. TORQUE
15 NM
15 NM
15 NM
15 NM
15 NM
15 NM
The MA850v2 Front Wing is a mid-aspect ratio wing ideal for all rider weights. Featuring a broad speed range and early lift for its size, without compromise to the top end, the MA850v2 has increased glide and pumpability. It is highly agile while retaining a locked-in feel for upwind/powered riding and ventilation-free tip-breaching.
Included:
Front Wing with Cover, Sonar Screw Pack E (M8x33)
Materials
Carbon Pre-preg
Flat, loose and fast, the new S208 Stabilizer is another high performance upgrade to the Sonar Foil System for experienced riders. The S208 has a higher aspect ratio than the S210, which means less drag, and the flatter rondure (front view) enables more manoeuvrability. As we’ve increased our front wing range, we’ve needed to match the lift force of the front wing with the stabilizer. While your front wing creates vertical lift, your stabilizer has a downward acting force, which prevents the front wing from nose-diving. A larger stabilizer translates into more front foot pressure, while a smaller stabilizer equals less front foot pressure. The North stabs are mounted on top of the fuselage, which helps them to avoid turbulence from the flow of the front wing, creating a smoother ride. This top mounting also gives the rider an early breach warning - the stab pierces the water surface first, giving you a better chance of recovery before your front wing gets too high. Like the Front Wings, all Sonar Stabilizers are pre-preg carbon construction, ensuring optimal stiffness and direct performance. The thin profile section reduces drag, while the material properties help maintain structural integrity and rigidity. Stabs have a huge influence on performance. As you progress to smaller wing sizes, we recommend changing to a smaller stabilizer to be more manoeuvrable. Experienced riders will really feel the difference. A new tail can have a big impact on your style.
Features
Clean undisturbed flow
Flat
loose and fast
Easy breach recovery
Thinner profile
Higher aspect ratio
Less surface friction for better glide
Materials
Carbon Pre-preg
The rear Stabilizer’s main role is to maintain a level and stable flight path. But conditions and user preference may change what stabilizer angle feels the best (aka the sweet spot). Shimming changes the angle of attack (AOA) and controls the amount of downforce the stabilizer creates on the overall foil system - to increase the stabilizer AOA and front foot pressure, add positive shim. The smallest tweak in the AOA can improve comfort, reduce fatigue, change the cadence of your pump or the turning radius of your carve and increase/decrease your front and rear foot pressure without changing your foot position. With the Sonar Shim Kit you can stack multiple shims, from our base setting it covers from -0.5 to +2.5 degrees. Finetune the way your foil system performs and change the way you ride. You’re in control.
1x -0.5 Deg Shim, 1x 0.5 Deg Shim, 2x 1 Deg Shim
Features
Stackable to cover -0.5deg to +2.5deg of tuning
Instant customisation without removing the Stabilizer
Tune for different disciplines and front wings
Cost-efficient foil system adjustment
Wing / SUP / Prone // Beginner: 82/76-1750/250 /// Intermediate: 82/66-1500/250
Unser Favorit für alle Einsteiger der mittleren Gewichtsklassen zwischen 65 kg und 85 kg! Mit dem Quickmount Mast verbringst du weniger Zeit beim Schrauben und mehr Zeit auf dem Foil. Das gutmütige und gleichzeitig aufregend zu fahrende Aero Free 1750 wirst du von den ersten Versuchen bis zum gehobenen Fahrlevel lieben.
Continuing the huge success of the AXIS 460 Carbon rear wing, was not an easy task. We kept the same chord, foil section, and wingspan of the original 460, but added a splash of turn down on the tips, similar to the Progressive rears.
This created a rear wing that is fast, stable, pumps unreal, and likes to turn with good carving performance. The perfect setup for all dock start, flat water pump, downwinding, wake, lightwind winging, and more.
If you don't have the AXIS 460 v2 rear wing in your bag of rear wings, you are certainly missing out. The AXIS 460 v2 carbon rear wing comes with its own AXIS cover, so your new AXIS wing is nicely protected.
We updated the graphics on this rear wing to show all the technical details you might be interested in (plus some):
Wingspan: 460mmMax Chord: 60mmTrue Area: 229.90cm2Aspect Ratio: 9.3Volume: 82.82cm3
Exceptional glide. Our new thinner profile and higher aspect ratio carbon stabilizers offer reduced resistance and a more efficient outline. The S270 is your go-to for all round kite, wing and surf performance, offering optimal balance, speed, efficiency and control. Pair the S210 with a smaller front wing for high-speed performance and a more agile feel. Pair the S320 with a larger front wing for early planing, greater balance and stability.
Features
Clean undisturbed flow
Easy breach recovery
Thinner profile
Higher aspect ratio
More efficient outline shape
Less surface friction for better glide
Materials
Carbon Pre-preg
FUSION CARBON HOLLOW MAST
HIGH PERFORMANCE - LIGHT WEIGHT
SIZES: 74 / 84 / 94 CM
The all-new Hollow Mast system is yet another example of the state of the art foil program from Cab Design Works. It nods to the critical & complete design approach of the team to view every foil component individually with a view to improve stiffness across the entire platform. It implements a bladder molded construction with strategic layering of carbon as far to the outside as possible. This culminates in our stiffest ever mast to front wing connection. This reduction in flex eliminates any lag in the turn and transfers energy while pumping seamlessly through to the front wing.
Features:
Optimized airfoil for low drag to stiffness ratio
TE scallop for improved turning and efficiency
Integrated high modulus mounting plate
Bladder molded, hollow mast construction for superior skin compression, providing ultimate rigidity
Premium high modulus prepreg carbon fiber construction
Barrel Nut compatible(x-series MkII and H-series MKII)
Tapered Fit
Mast Guide:
EFFICIENT / FAST / CARVE
Die perfekte Kombination aus Geschwindigkeit, Fahrstabilität, Lift und Agilität erlauben schnelle Lernfortschritte und eine harmonisch ausgewogene Balance.
DETAILS
Die perfekte Kombination aus Geschwindigkeit, Fahrstabilität, Lift und Agilität erlauben schnelle Lernfortschritte und eine harmonisch ausgewogene Balance. Bei höheren Geschwindigkeiten besticht das 633 mit herausragender Spurtreue und einem schön direkten Fahrverhalten, wodurch Jibes und Tacks zu einem echten Hochgenuss werden. Durch den einzigartigen Inverted-Gull-Shape markieren die Carving-Eigenschaften und die dabei gefühlte Kontrolle über das Foil eine vollkommen neue Dimension an Fahrspaß, die man selbst erlebt haben muss, um die Faszination des Phantasm 633 in vollem Umfang zu begreifen.
Die PFI-Wings wurden entwickelt, um dir das Optimum an Freeride-Performance zu bieten. Attraktive Geschwindigkeit, maximale Fahrstabilität, satter Lift und ein manöverorientierter Charakter, diese Aspekte zeichnen die PFI-Series aus. Die benutzerfreundlichsten und am leichtesten zu fahrenden Wings der Phantasm-Range.
Lieferumfang:Phantasm PFI Series Front Wing, Rear Stabilizer, Fuse, Hardware (316 Stainless Steel Torx), Neoprene Wing Covers, Carrying Case.
Fläche
1270 cm²
Breite
633 mm
Tiefe
264 mm
Aspekt Ratio
3.2
Sabfoil Gullwing 380 Pro Finish | Hydrofoil Stabilizer
MAIN SPECS
Surface: 180 cm2
AR: 8,10
Wingspan: 380 mm
Chord: 60 mm
Range
Gullwing
Stabilizer-Fuselage Connection
Standard
This fast and versatile stabilizer is ideal for all those who want to increase the control and stability of their hydrofoil. The gullwing shape guarantees good directionality while riding without sacrificing maneuverability when needed.
The S380/PF is delivered with SAB Pro Finish, and thus hand sanded to achieve a matte surface with 0-thickness graphics, for an elegant Made in Italy product with maximum performance.
Unser Aero AL Set ist eine solide Basis für jeden, der ins Foilen einsteigt und ein beständiges Mast & Fuselage Set sucht, das weit in alle Disziplinen und auch höhere Können Stufen des Foilens hinein reicht. Die Verschraubungen lassen problemlos Updates auf neue Front- und Back Wings zu und sind vorwärts und rückwärts kompatibel mit den Fanatic Wings sowie den neuen Duotone Foils.
Fuselage:
LENGTH (CM)
66
76
90
SCREW INFOS
2X M8X35
2X M8X35
2X M8X35
DISCIPLINES
ALLROUND WING, KITE, PRONE, SUP, PUMP, DOWNWIND
ENTRY-ALLROUND WING, SUP, PRONE, PUMP, DOWNWIND
ALLROUND WINDSURF
CHARACTER
MANEUVRABLE, GREAT GLIDE, GREAT CONTROL, GOOD POP
PITCH STABLE, CONTROLLED, GREAT GLIDE - ADJUSTABLE STABILIZER OPTION
BALANCED WITH ACCESSIBLE PERFORMANCE
COMPATIBILITY WINGS
DUOTONE AERO SLS WINGS / FANATIC AERO WINGS
DUOTONE AERO SLS WINGS / FANATIC AERO WINGS
DUOTONE AERO SLS WINGS / FANATIC AERO WINGS
COMPATIBILITY MASTS
DUOTONE AERO AL & AL QM MASTS (NOT SLIM AL) / FANATIC AL3.0 MASTS
DUOTONE AERO AL & AL QM MASTS (NOT SLIM AL) / FANATIC AL3.0 MASTS
DUOTONE AERO AL &
The Sonar High Aspect Front Wing Series is engineered for the highest speed and efficiency possible across a range of disciplines – from kite foiling to prone foil surfing. With this style of wing, you need minimal pump and power to generate glide. The shorter chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability and a slightly longer radius turn than a lower aspect ratio wing of the same size. The wingtips are refined to ensure there is no ventilation when you tip breach, giving you the ability to crank tighter radius turns at higher speeds, without losing speed. The smaller HA650 have less planing surface and higher stall speed. They are designed to generate maximum efficiency and lift for high-speed wing foiling, racing, and kite foiling.
Complete Foil Set with Aluminium.includes all Screws, Nuts and Tools for assempling the foilThis foil is perfect for Freeride Winging or Pumpfoiling.the 1700 foil for lighter People or stronger windThe 1950 for heavier people or lighterr wind
ENSIS TRACKSTER 1700Wing size: 2.5 – 5.2 m2Rider weight: 55- 85 kgWind range: 12 – 28 knts
Easy take off – high liftSmooth riding – great stabilityRobust – Alu mast and fuselage
ENSIS TRACKSTER 1900Wing size: 3.5 – 6.2 m2Rider weight: 65 – 100 kgWind range: 12 – 20 knts
Easy take off – high liftSmooth riding – great stabilityRobust – Alu mast and fuselage
Whether winging at speed, laying deep carves on a wave face or pumping and linking up swells on a downwinder – AXIS Power Carbon enters a new realm of control and connection between board and foil. It’s the next giant leap in foiling performance.
High aspect foils = higher loads on masts
During early ART foil testing, our research team quickly realized that higher aspect ratios and broader foil spans applied more bending and twisting forces to the mast. So while ART foils were a game-changer even on our existing masts, we knew there was still huge untapped potential to be realized.
And so began a whole new development project, and we couldn’t be more excited at the result. With a new power profile and carefully considered material selection and placement, AXIS Power Carbon delivers both superior stiffness with next-level strength.
Opting for a one-piece design, we avoided the flow/drag and jointing issues associated with multi-part mast constructions.
Additionally and more importantly, testing proves that maximum loading is concentrated close to the baseplate and this is why the mast tapers thicker at this point to handle the loads. Any joins or two-piece construction at this high load area would destroy the integrity of the mast.
A revised fuselage connection design maximizes the size of the attachment point to achieve a perfect fit to the fuselage reducing any chance of unwanted movement.
The result is a positive connected feel, direct drive, immediate feedback and ultimate control. High aspect foils perform as they should, feel and control enter an entirely new realm.
The new High Modulus Carbon fibre used in our mast layup is considerably stiffer and stronger than the regular carbon fibre used in conventional constructions. Innovative, considered and balanced placement of materials in our proprietary production process paired with rigorous testing has delivered a breathtaking performance leap.
Ride characteristics are so game-changing, that it’s been a struggle to get our team riders to return the prototypes after testing!
Feedback featured claims like ‘a way more positive and connected feel’, ‘immediate feedback’ and ‘ultimate control’.
Choose your Power level
Our new masts are available in two models, the Power Carbon and Power Carbon - High Modulus, the latter providing additional strength and 35% more bend resistance than our industry-leading 19mm aluminium mast. The High Modulus will be the mast of choice for the most discerning rider seeking ultimate performance, and heavier riders using our larger span foils.
With AXIS Power Carbon masts, riders will finally be at one with the foil.
AXIS Power Carbon Masts have a new and greatly improved base connection design. While fully compatible with all existing Red & Black fuselage, a new installation technique/method is required, this involves simply inserting the mast leading edge first into the fuselage opening, then rotating the trailing edge down. Removal is done in reverse, trailing edge rotates out first... super simple!
Remember use only 30mm M8 bolts to attach fuselage to Power Carbon masts
Set Includes:
Front Wing - 1150 - PNG - Carbon
1150mm x 180mm / 1778cm² / High Aspect
475 Carbon Rear Hydrofoil wing
475 mm x 68mm
S-Series - Fuselage - Standard Length - 765mm
765mm
19mm - AXIS K/S-Series Freeride Foil Mast 75cm
75cm / 29.53"
Fuselage to 19mm Mast Adapter / Doodad
To Fit 19mm Mast
19mm K/S-Series Foil Base Plate
To Fit 19mm Mast
One STAINLESS Screwset and Toolset for All Black Series, S-Series
Stainless - Standard
PUMP AND GLIDE
Our ultimate pump and glide wing series.
There’s no other wing like the Pump and Glide. A unique combination of medium and high aspect, thinner foil and high camber, PNG gets you up easily – then keeps you going, and going, and going. The foil section design also has a high stall angle, which means it performs exceptionally at slower speeds.Dock foilers need look no further. This is your foil.PNG is a firm favourite with SUP foilers too, maximising your ability to pump back out and foil straight onto the next wave. Lots of our AXIS customers have also learned to wing foil on this design. However, the same characteristics that make it a great pumping foil will also hold back its top speed.
950
DESCRIPTION
The new BLAZE set runs with the evolution of foiling. Its extraordinary efficiency and glide allow you to do everything effortlessly whether it is Wing, Surf or Kite foiling.The Blaze wings are designed to bring you to the peak of your performance, with a 6.5 aspect ratio you gain the speed but also the maneuverability you are dreaming of. The new rear wings maximize acceleration and control.The Blaze wings fit inside a well-tested and proven fuselage to mast system that offers the best compromise of stiffness and lightness. Our aluminum mast is 100% safe with new added side screws which ensure that every single component of the foil is 100% safe with no risk of breakage or loss. With this set you can truly push yourself further without any risk.
The BLAZE ALU 950 addresses the need of riding at a higher speed and perform radical turns. The 950 front wing is super responsive, turns on a dime, and you can really control the foil all the way from the pocket to the steep section of the wave. For wing foiling it is a mind blowing for skilled riders with plenty of performance to have fun with. Ideal for foiling with consistent waves size (+1 mt) or in flatwater with medium to stronger wind.
DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
BLAZE FULL CARBON FRONT WING 79/950 with PADDED COVER Y27
BLAZE FULL CARBON REAR WING 38/195 with PADDED COVER Y27
FUSELAGE 66 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
1250
ESCRIPTION
The new BLAZE set runs with the evolution of foiling. Its extraordinary efficiency and glide allow you to do everything effortlessly whether it is Wing, Surf or Kite foiling.The Blaze wings are designed to bring you to the peak of your performance, with a 6.5 aspect ratio you gain the speed but also the maneuverability you are dreaming of. The new rear wings maximize acceleration and control.The Blaze wings fit inside a well-tested and proven fuselage to mast system that offers the best compromise of stiffness and lightness. Our aluminum mast is 100% safe with new added side screws which ensure that every single component of the foil is 100% safe with no risk of breakage or loss. With this set you can truly push yourself further without any risk.
-The BLAZE ALU 1250 is the most versatile in the range. All in one use for wing, surf, kite foiling. Extremely efficient to pump and ideal for connecting waves. It adapts to various conditions whether it is waves or flat water. Explore its potential, fun is guaranteed.
DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
BLAZE FULL CARBON FRONT WING 86,5/1250 with PADDED COVER Y27
BLAZE FULL CARBON REAR WING 41/215 with PADDED COVER Y27
FUSELAGE 66 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
1550
DESCRIPTION
The new BLAZE set runs with the evolution of foiling. Its extraordinary efficiency and glide allow you to do everything effortlessly whether it is Wing, Surf or Kite foiling.The Blaze wings are designed to bring you to the peak of your performance, with a 6.5 aspect ratio you gain the speed but also the maneuverability you are dreaming of. The new rear wings maximize acceleration and control.The Blaze wings fit inside a well-tested and proven fuselage to mast system that offers the best compromise of stiffness and lightness. Our aluminum mast is 100% safe with new added side screws which ensure that every single component of the foil is 100% safe with no risk of breakage or loss. With this set you can truly push yourself further without any risk.
-The BLAZE ALU 1550 gives a pure effortlessly feel. You can glide for long distances enjoying the pleasure of pumping the foil, surfing the waves or having a blast ride with the wing. Appreciate its incredible maneuverability and smooth efficient flight. Use it for wing, surf, downwinders and kite. For medium to heavy weight riders.
DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
BLAZE FULL CARBON FRONT WING 97,5/1550 with PADDED COVER Y27
BLAZE FULL CARBON REAR WING 41/215 with PADDED COVER Y27
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
1850
DESCRIPTION
The new BLAZE set runs with the evolution of foiling. Its extraordinary efficiency and glide allow you to do everything effortlessly whether it is Wing, Surf or Kite foiling.The Blaze wings are designed to bring you to the peak of your performance, with a 6.5 aspect ratio you gain the speed but also the maneuverability you are dreaming of. The new rear wings maximize acceleration and control.The Blaze wings fit inside a well-tested and proven fuselage to mast system that offers the best compromise of stiffness and lightness. Our aluminum mast is 100% safe with new added side screws which ensure that every single component of the foil is 100% safe with no risk of breakage or loss. With this set you can truly push yourself further without any risk.
-The BLAZE ALU 1850 is for heavier riders that want to mix more lift and great glide. The most accessible in the Blaze range and enjoyable for its versatility. You can wing, ride downwind, dock start or wake foil. A pure thrill to give you hours of excitement in the water.
DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
BLAZE FULL CARBON FRONT WING 103,5/1850 with PADDED COVER Y27
BLAZE FULL CARBON REAR WING 45/250 with PADDED COVER Y27
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
SLS steht für Strong Light Superior und ist die Ausrüstung, die dich dazu befähigt, deine Grenzen zu überschreiten und kompromisslos nach Spitzenleistungen zu streben.
Unser Aero SLS Masten in Kombination mit AL 3BS Fuselages gehören zu den stärksten Setups am Markt. Mit kräftiger Strukturstärke, bombenfesten Verschraubungen und geringem Gewicht bieten diese Mast/Fuselage Sets wahnsinnig direkte Fahrleistung selbst bei Front Wings mit extrem großen Spannweiten. Die schlanken und gewichtsoptimierten AL 3BS Fuselages sind die perfekte Kombination mit unseren SLS Masten und vereinen sehr geringen Strömungswiderstand mit direkter und außergewöhnlich hoher Fahrleistung!
FUSELAGE
60
66
74
90
LENGTH (CM)
3X M8X50
3X M8X50
3X M8X50
3X M8X50
SCREW INFO
ADVANCED WING, PRONE, KITE
ALLROUND WING, KITE, PRONE, SUP, PUMP, DOWNWIND
ENTRY-ALLROUND WING, SUP, PRONE, PUMP, DOWNWIND
ALLROUND WINDSURF
DISCIPLINES
ULTRA MANEUVRABLE, INSTANT POP
MANEUVRABLE, GREAT GLIDE, GREAT CONTROL, GOOD POP
PITCH STABLE, CONTROLLED, GREAT GLIDE
BALANCED WITH ACCESSIBLE PERFORMANCE
CHARACTER
DUOTONE AERO SLS WINGS / FANATIC AERO WINGS
DUOTONE AERO SLS WINGS / FANATIC AERO WINGS
DUOTONE AERO SLS WINGS / FANATIC AERO WINGS
DUOTONE AERO SLS WINGS / FANATIC AERO WINGS
COMPATIBILITY WINGS
DUOTONE AERO D/LAB & SLS MASTS / FANATIC CARBON MASTS
DUOTONE AERO D/LAB & SLS MASTS / FANATIC CARBON MASTS
DUOTONE AERO D/LAB & SLS MASTS / FANATIC CARBON MASTS
DUOTONE AERO D/LAB & SLS MASTS / FANATIC CARBON MASTS
Control
Unsere Stabilizer C haben sich in den letzten Jahren in Kombination mit sämtlichen Front Wings bestens bewährt. Sie sind das, was man als "traditionell" bezeichnen würde mit einer mittleren Aspect Ratio, flach in der Mitte und ein subtiles Winglet zu den Wing Tips hin.
Ein gut getestetes und bewährtes Design, das hervorragend mit unseren Aero Free SLS und Aero Lift SLS Front Wings zusammenpasst.
Die C-Serie steht für Kontrolle. Bei ihnen geht es darum, den Fahrer auf seiner Flugbahn zu unterstützen und dem Foil Kontrolleigenschaften zu verleihen, ohne den Spaßfaktor einzuschränken.
Obwohl sie einen stabilen Flug gewährleisten, sind sie perfekt für sanfte Turns auf der Welle.
Mit Hilfe der brandneuen dünnen Shims kannst du den Anstellwinkel deines Stabilizers in Schritten von +/- 0,3 Grad anpassen, passend zu deinem Fahrstil oder den aktuellen Bedingungen.